Control Arm Bushings And Sleeves fits 1994-1999 Dodge Ram 1500/2500/3500

Description

Control Arm Replacement Bushing & Sleeve Kit
1994-1999 Dodge Ram 1500 4WD
1994-1999 Dodge Ram 2500 4WD
1994-1999 Dodge Ram 3500 4WD
Description:
This is a new set of replacement control arm bushings and sleeves for Stryker Off Road Design brand Dodge/Ram control arms. There are enough to replace all bushings and sleeves for the entire set of 4 arms. If you have control arms made by another company these may not fit. These are brand new polyurethane bushings and DOM sleeves.
We use heavy wall DOM tubing, with NO split seam, for our sleeves. The issue with the competitors sleeves is they are thinner wall and simply rolled over. This leaves a gap/seam. Control arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness.
Kit Contents:
(8) Upper Control Arm Bushings
(4) Upper Control Arm Sleeves
(8) Lower Control Arm Bushings
(4) Lower Control Arm Sleeves
Fitment:
1994-1999 Dodge Ram 1500 4WD
1994-1999 Dodge Ram 2500 4WD
1994-1999 Dodge Ram 3500 4WD
Notes:
Only guaranteed to fit Stryker Off Road Design brand control arms.